Browse live millwright jobs in Johannesburg, Gauteng. Salaries, top employers and how to apply. Updated regularly.

DIESEL \& ELECTRICAL TECHNICIANAtlas Plant Hire – East London

Atlas Plant Hire is looking for an experienced and qualified Diesel \& Electrical Technician to join our growing East London branch.

This is a hands\-on, dual\-function technical role suited to someone with strong diesel/mechanical and electrical experience, who can confidently diagnose faults, carry out repairs and keep our equipment operating reliably.

WHAT YOU'LL DO

* Service, maintain and repair generators, compressors, pumps and support vehicles.
* Perform fault\-finding, diagnostics and breakdown recovery, including rotational standby and after\-hours support.
* Carry out major mechanical repairs, including engine overhauls, cylinder head work, fuel and cooling systems.
* Diagnose and repair hydraulic, pneumatic and 12V/24V auto\-electrical systems.
* Perform electrical fault\-finding and repairs on generators, including control panels, ATS, synchronising systems and controllers.
* Conduct generator testing, load testing, commissioning and pre/post equipment inspections.
* Complete accurate job cards, QC and incident reports, parts requests and assist with stock control.
* Maintain high housekeeping standards and ensure all work complies with SHEQ and ISO requirements.
* Provide technical support to the workshop, field service team and customers.

WHAT WE'RE LOOKING FOR

* Millwright Trade Qualification – Essential.
* Minimum 5 years' relevant technical experience, preferably in heavy plant, generators or field service.
* Proven experience working on heavy\-duty diesel engines.
* Diesel Mechanic Trade Test – Advantageous.
* Strong diesel/mechanical and electrical fault\-finding and diagnostic skills.
* Experience with generators, compressors, pumps, hydraulics, pneumatics and basic auto\-electrical systems.
* Ability to read and interpret electrical diagrams and technical documentation.
* Valid Code 10 driver's licence.
* Strong safety awareness, reliability, communication skills and a customer\-focused approach.
* Willingness to work after hours, participate in rotational standby and travel nationally when required.
* Clear criminal record.

JOIN THE ATLAS TEAM

This is an opportunity to join a fast\-growing East London operation and play an important role in supporting our continued growth and customer service.

If you're technically strong, hands\-on and looking for an opportunity where your skills will make a real difference, we'd like to hear from you.

**Apply to:** hr@atlasplanthire.co.za  
**Closing date:** 4 September 2026

Applications must consist of a complrehensive CV and qualifications.

Only shortlisted candidates will be contacted, should you not hear from us within 2 weeks of application, please consider your application unsuccessfull.

The company reserves the right to close this vacancy at any time, whether the role has been filled or not.

Pay: From R20 000,00 per month

Work Location: In person

Diesel / Electrical Technician

**Introduction:** 

Komatsu South Africa has an amazing opportunity in the Operations division at our Grootegeluk branch, for a Product Support and Sales Representative that provides expert technical advice to customers in supporting Komatsu mining products. The successful candidate must have a minimum of 4 years working experience as a Millwright and specific experience servicing and maintaining Komatsu Electric Wheel Loaders (WE1850/2350\).

**Qualifications:**

* Millwright Trade Certificate
* Medium Voltage Certificate (an advantage)

**Experience**

* A minimum of 4 or more years’ post trade experience in the earthmoving industry working Electric Drive Trucks / Hydraulic \& Electric Rope Shovels / Wheel Loaders.
* A minimum of 2 years’ supervisory experience (an advantage)
* Machine Operator License (an advantage)
* Komatsu product knowledge

**Specific knowledge requirements**

* SAP Quoting
* MS Office
* CSS Portal KMG
* EPQ Care
* Komtrax

**Summary description of the role:** 

* **Safety Observations** \- Identify and report safety\-related defects.
* **Fleet Health Monitoring** \- Monitor fleet condition, reliability trends, and component health.
* **KomServ Inspections** \- Conduct scheduled inspections and condition assessments.
* **Equipment Condition Reports** \- Compile, issue, and review reports with recommendations.
* **Photo Reporting** \- Capture and document defects and failures.
* **Technical Support** \- Provide OEM technical guidance and troubleshooting support.
* **Failure Analysis** \- Assist with RCFA and identify root causes.
* **Maintenance Planning** \- Recommend maintenance strategies and component interventions.
* **Planned Maintenance** \- Monitor PM compliance and advise improvements.
* **Component Life Management** \- Monitor component health and predict replacement requirements.
* **Warranty Support** \- Identify opportunities and compile warranty documentation.
* **OEM Liaison** \- Escalate technical issues to Komatsu factory support.
* **Product Improvement Programs** \- Communicate OEM campaigns and upgrades.
* **Parts Forecasting** \- Recommend critical parts requirements.
* **Reliability Improvement** \- Drive continuous improvement initiatives and recommendations.
* **Artisan \& Operator Coaching** \- Provide technical guidance and best\-practice recommendations.
* **Performance Reporting** \- Issue daily, weekly, and monthly reports.
* **Customer Satisfaction** \- Maintain Komatsu customer relationship and communication.

Application Question(s):

* Which machines you have experience in troubleshooting, servicing and maintaining?

Education:

* Certificate (Required)

Experience:

* servicing and maintaining heavy earth moving equipment : 4 years (Required)

License/Certification:

* driver's license (Required)

Work Location: In person

Product Support & Sales Rep (ME)

Duties & Responsibilities Fault finding and ensure standard of all machinery. Replace defective parts of machine or adjust clearances and alignment of moving parts. Align machines an equipment using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs. Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation. Repair and lubricate machines and equipment. Assemble and install equipment, using hand tools and power tools. Inse…

Millwright - FMCG

Hendok has an exciting opportunity in our Maintenance Department. We are looking for a talented individual with relevant skills and experience based in **Durban** as a **Shift** **Mechanical Fitter.** The successful candidate will report directly to the **Maintenance Manager**.

**Key Purpose**

To use their tools and engineering techniques to maintain and repair mechanical plant machinery and equipment to operational standards

**Responsibilities**

* Maintain mechanical drives as well as hydraulic and pneumatic components
* Machine reliability and availability delivered as per regional targets \- preventative maintenance schedules executed, develop and upgrade maintenance schedules for plant and equipment
* Provide technical expertise and guidance to process teams \- operating procedures, fault finding
* Provide project support with regards to commissioning machines and equipment or pilot and test a new technical service
* Participate as functional problem solving
* Identify opportunities for innovation (Installation upgrades, enhancements and shared learnings)
* Control logistical flow of machine components and materials (Stores, materials)
* Address safety, health and environmental requirements and hazards.
* Monitor and control quality control practices in a manufacturing / engineering environment.

**Key attributes and competencies**

* Able to work under pressure and handle constructive feedback
* Accountability, Credibility and Integrity
* Fault Finding and Execution
* Perform Mechanical Maintenance
* Innovation and Continuous Improvement
* Ability to work shifts

**Qualifications / Experience**

* N3/N4 National Certificate in Mechanical Engineering
* Fitter Trade Test (or related Turner / Millwright)
* 5 Years’ experience within a similar environment

The advert has minimum requirements listed. Management reserves the right to use additional or relevant information as criteria for short\-listing. Where possible, preference will be given to candidates from the designated groups as defined in the Employment Equity Act and in line with Hendok’s Employment Equity plan. Hendok reserves the right to defer or close a vacancy at any time.

Hendok is POPIA compliant.

Job Type: Full\-time

Application Question(s):

* Are you able to work shifts?
* Have you completed your fitters trade test?

Experience:

* Mechanical Fitting: 5 years (Required)

Location:

* Durban, KwaZulu\-Natal (Required)

Work Location: In person

Shift Mechanical Fitter

Reference: KZN000860-CK-1 MILLWRIGHT KZN - CATO RIDGE We are looking for a qualified Millwright with strong mechanical and electrical fault-finding skills to join our team in a permanent role. Duties & Responsibilities Key Duties and Responsibilities: Main Job Responsibilities: Attend to planned and unplanned maintenance and breakdowns on plant and machinery. Fault-find and repair mechanical and electrical equipment. Replace defective parts and carry out machine alignment, adjustments and repai…

Millwright

Introduction Wellington Area – Western Cape: Our client is looking for a Millwright to join the team. Only candidates with the relevant experience will be considered. Duties & Responsibilities MINIMUM REQUIREMENTS National Senior Certificate N2 Mechanical and Electrical National Certificate A recognised Millwright Trade Test Certificate (Red Seal) as obtained in South Africa 0-2 years post-trade experience Fully bilingual (Afrikaans and English) Must be willing to perform standby duties as requ…

Millwright - Fm1941

MINIMUM REQUIREMENTS National Senior Certificate N2 Mechanical and Electrical National Certificate A recognised Millwright Trade Test Certificate (Red Seal) as obtained in South Africa 0-2 years post-trade experience Fully bilingual (Afrikaans and English) Must be willing to perform standby duties as required. Must be willing to work overtime. Forklift license is advantageous SKILLS AND CAPABILITIES Good at adhering to strict safety guidelines and conscious of safety risks. Excellent attention …

MILLWRIGHT

About the Opportunity Average Millwrights fix breakdowns. Exceptional Millwrights stop them from happening again. Is this you? You enjoy solving complex electrical and mechanical faults rather than simply replacing parts. Calm under pressure, practical and self-motivated, you take ownership of equipment, work independently and pride yourself on high-quality workmanship. Continuous improvement, reliability and safety come naturally to you. What you'll be doing (and why you'll enjoy it) Your days…

Reference: Pta003154-EP-27 Millwright positions available in the Netherlands. Must have completed trade/red seal. Fluent Afrikaans and English. Must be under the age of 28 for Visa requirements. 2-year contract with possibility of extension. Millwright Netherlands, Europe 2-year contract with an extension if successful Flight ticket and accommodation Minimum requirements and experience: Completed Matric Red seal qualification completed Younger than 28 for visa requirements Fluent in English and…

Millwright Amsterdam

Millwright Maintenance Technician Location: Midrand Employment Type: Permanent Our client is seeking an experienced Millwright Maintenance Technician to execute electrical and mechanical planned, unplanned and corrective maintenance activities across the plant. The successful candidate will ensure equipment reliability and availability through safe, high-quality maintenance while providing technical support to operators and contributing to engineering and local projects. Key Responsibilities Ex…

Millwright Maintenance Technician

**Purpose**  

  

The main purpose of this position is to render maintenance support through Electromechanical and electrical\-related installations and repairs, routine and scheduled maintenance and callouts.  

  

**Minimum Requirement**  

* Qualified Artisan Certificate (Red Seal) with Mechanical and Electrical trade competencies,
* Minimum of three (3\) years' post\-trade experience in electrical and electromechanical maintenance within the built environment.

**Recommended requirements**  

Experience in electrical and mechanical maintenance within a higher education or facilities management environment would be an added advantage.  

  

**Duties**  

* **Maintenance and repairs of electrical and electromechanical breakdowns reported on campus**
* Electric motors and motor control systems;
* Pumps and pumping systems;
* Generators and standby power equipment;
* Transformers and electrical distribution equipment;
* Mechanical drives and rotating equipment;
* Automation and control systems;
* Assemble, install, test and maintain electrical equipment and malfunctioning systems through fault finding
* Pressure systems and associated plant equipment
* Preventative and corrective maintenance of electromechanical infrastructure
* Connect wires to circuit breakers, lights, plugs and other components
* Inspect electrical systems to identify defects and make necessary repairs
* Evaluate jobs and projects, determine material requirements and order
* **Routine Maintenance**
* Perform routine maintenance on electrical and electromechanical systems in university buildings, lecture halls, offices, residences, and associated facilities.
* Conduct planned preventative and corrective maintenance on electrical installations, motors, pumps, control panels, distribution boards, generators, mechanical drives, and related electromechanical infrastructure.
* Locate and identify existing electrical wiring, cables, conduits, isolation points, and equipment before commencing repairs, alterations, or new installations.
* Ensure that all work complies with Occupational Health and Safety requirements, applicable building regulations, electrical standards, and University procedures.
* Inspect, test, repair, replace, and maintain electrical and electromechanical equipment and fixtures according to approved maintenance schedules and allocated job numbers.
* Conduct fault\-finding, testing, isolation, repair, and commissioning of electrical and electromechanical systems.
* Perform physically demanding work, including. drilling, chasing, grinding, cutting, and breaking walls to install electrical plugs, lighting, conduits, cables, and related equipment.
* Apply the required Hazard Identification and Risk Assessment and Lockout\-Tagout procedures before working on energised or potentially hazardous equipment.
* Ensure that work areas are made safe, debris is removed, and affected walls, ceilings, floors, and finishes are properly reinstated after completion.
* Record all maintenance activities, test results, materials used, defects identified, and outstanding work against the relevant job number.
* **Scheduled maintenance**
* Scheduled maintenance of frequently used locations such as lecture halls, office and administrative
* Scheduled maintenance of Plant and equipment
* Scheduled maintenance of residences.

**Mechanical Scheduled Maintenance**

* Lubrication Management: Checking oil levels, draining and flushing gearboxes, and greasing highspeed bearings using specified grease types and quantities.
* Precision Realignment Checks: Conducting scheduled laser or dial indicator checks on motor\-togearbox couplings to prevent vibration\-induced failures.
* Vibration Analysis: Using handheld vibration pens or sensors on bearing housings to detect early signs of internal fatigue, imbalance, or wear.
* Fluid Power Service (Hydraulics \& Pneumatics): Replacing system oil filters, testing accumulator gas charges, checking for hydraulic hose wear, and draining pneumatic moisture traps.
* Drive Component Adjustments: Inspecting, tensioning, and replacing worn V\-belts, drive chains, sprockets, and pulleys to maximize power transmission efficiency.
* Seals and Packings Inspection: Checking centrifugal pumps, valves, and actuators for fluid leaks, and replacing mechanical seals or gland packings before failure.

**Electrical Scheduled Maintenance**

* Thermal Imaging (Thermography): Using infrared cameras on live electrical distribution boards and control panels to look for hot spots caused by loose connections.
* Panel Cleaning and Tightening: Isolating panels to vacuum out dust/debris and torquing terminal screws to specification to prevent arcing and electrical fires.
* Insulation Resistance Testing (Meggin): Performing scheduled insulation tests on electric motor windings to catch internal breakdown before a short circuit occurs.
* Motor Current Overload Testing: Measuring running amperage on all three phases of a motor using a clamp meter to ensure it stays within nameplate limits.
* Safety Interlock Inspections: Testing emergencies stop buttons, safety light curtains, pull\-switches, and door limit switches to ensure immediate system shutdown.
* PLC and Automation Backups: Checking PLC battery status lights, swapping backup batteries while the system is powered, and ensuring automation panels are cooling properly.
* VSD Filter and Fan Service: Cleaning or replacing the ventilation filters and cooling fans on Variable Speed Drives to prevent overheating trips**.**
* **Breakdown callouts**
* Attend call\-outs both over weekends and after hours
* Ensure availability and response when on standby duty
* When emergency repairs are conducted, ensure that permanent repairs are done according to electrical standards.
* Record all breakdowns, actions taken, materials used, and outstanding permanent repairs against the relevant job card.
* **Administration**
* Collect Job cards from Senior Officer: Maintenance (Foremen), discuss requirements if necessary
* Keep record of material utilised on each job
* Have department sign off the job card before returning the completed job card to the Foreman for inspection of completed work
* **Maintenance and safekeeping of equipment and machinery**
* Ensure that all equipment and machinery are regularly inspected, maintained, and serviced according to the prescribed schedules and manufacturer requirements.
* Ensure that all equipment and machinery are stored safely and securely to prevent damage, misuse, theft, or unauthorised access.
* Maintain accurate service, maintenance, and equipment\-control records**.**
* **Safety, health and environmental management**
* Identify and report unsafe circumstances
* Ensure compliance with SHE policies and procedures.
* Use prescribed personal protective equipment.

**Risk Assessments (HIRA)**

* Conduct and document a Hazard Identification and Risk Assessment (HIRA) for each job before work commences.
* Identify all potential hazards associated with the task, equipment, work area, and personnel involved.
* Determine the level of risk and implement appropriate control measures to eliminate or reduce the risk.
* Communicate the identified hazards and control measures to all employees and contractors involved.
* Review and update the HIRA whenever the scope of work, conditions, equipment, or risks change.
* Ensure that the completed HIRA is approved and available at the work site for the duration of the job.

**Lockout\-Tagout (LOTO) Permits**

* Identify the specific jobs that require Lockout\-Tagout (LOTO) permits before work commences.
* Ensure that all relevant electrical, mechanical, hydraulic, pneumatic, thermal, or other hazardous energy sources are isolated.
* Verify that the correct isolation points are identified, locked, tagged, and tested before any maintenance or repair work begins.
* Ensure that LOTO permits are completed, authorised, and linked to the applicable job card.
* Communicate the isolation proc

Dual Trade Millwright (Electromechanical) (P11)

Job Description Talent Pipeline: Millwrights & Fitters (Delmas, Mpumalanga and surrounding areas) We are building a database of qualified artisans for upcoming technical roles in the food/FMCG sector. Requirements: Trade Test (Millwright / Fitter) Matric (essential) Proven experience in maintenance and repairs Strong fault-finding ability Relevant certification Exposure to pneumatics and hydraulics Willingness to work shifts and overtime Reliable transport Please Note: This is a pipeline advert…

Millwrights & Fitters Pipeline

Western Cape – Western Cape: Our client is looking for a Millwright to join the team. Only candidates with the relevant experience will be considered. MINIMUM REQUIREMENTS National Senior Certificate N2 Mechanical and Electrical National Certificate A recognised Millwright Trade Test Certificate (Red Seal) as obtained in South Africa 0-2 years post-trade experience Fully bilingual (Afrikaans and English) Must be willing to perform standby duties as required. Must be willing to work overtime. Fo…

Vacancy: MILLWRIGHTArea: Leslie, MpumalangaIndustry: ProductionRequirements:5 Years within FMCG / Manufacturing environmentKnowledge of plant automation operations Instrumentation / SCADA Systems/ PLC / HMI / High Voltage Switching (advantage)Fault Finding - Electrical and mechanical schematic Qualifications:Red Seal Millwright trade test CertificateSupervisor / Refresher CourseDryer / Heater bank system trainingFSSC training (advantage)OHS Safety Rep (advantage)First Aid / Fire Fighting formal…

Millwright - Urgent

Ready to get your hands dirty and keep production moving? A leading plastics manufacturing company in Cape Town is looking for a hands-on Junior Millwright to join their maintenance team. If you're confident troubleshooting electrical and mechanical equipment, enjoy solving problems, and have experience in a fast-paced FMCG or manufacturing environment, this could be the opportunity for you! Minimum Requirements Millwright Trade Test Minimum 5 years' experience within FMCG or manufacturing envi…

Junior Millwright

Ready to get your hands dirty and keep production moving? A leading plastics manufacturing company in Cape Town is looking for a hands-on Junior Millwright to join their maintenance team. If you're confident troubleshooting electrical and mechanical equipment, enjoy solving problems, and have experience in a fast-paced FMCG or manufacturing environment, this could be the opportunity for you! Minimum Requirements: Millwright Trade Test Minimum 5 years' experience within FMCG or manufacturing env…

Average Millwrights fix breakdowns. Exceptional Millwrights stop them from happening again. Is this you? You enjoy solving complex electrical and mechanical faults rather than simply replacing parts. Calm under pressure, practical and self-motivated, you take ownership of equipment, work independently and pride yourself on high-quality workmanship. Continuous improvement, reliability and safety come naturally to you. What you'll be doing (and why you'll enjoy it) Your days will involve fault fi…

Millwright Stellenbosch

Description To ensure the efficient and effective operation of electric works and mechanical repairs. Requirements REQUIRED MINIMUM EDUCATION/TRAINING N3 or Grade 12 Trade Test: Electrical 6 months On Job Training REQUIRED MINIMUM WORK EXPERIENCE Minimum 3 years experience as an Electrician. KEY PERFORMANCE AREAS Perform Plant maintenance: Electrical and Mechanical. Perform inspections and breakdown repairs on production machinery/equipment. Performing tasks as per reasonable instruction from E…

Millwright (Milling)

Reference: KZN000860-CK-1 MILLWRIGHT KZN - CATO RIDGE We are looking for a qualified Millwright with strong mechanical and electrical fault-finding skills to join our team in a permanent role. Key Duties and Responsibilities: Main Job Responsibilities: Attend to planned and unplanned maintenance and breakdowns on plant and machinery. Fault-find and repair mechanical and electrical equipment. Replace defective parts and carry out machine alignment, adjustments and repairs. Assemble, install, dis…

Millwright Cato Ridge

**Wellington Area – Western Cape:** Our client is looking for a Millwright to join the team.


‍  

**Only** candidates with the relevant experience will be considered.  

  

**MINIMUM REQUIREMENTS:**

* National Senior Certificate.
* N2 Mechanical and Electrical National Certificate.
* A recognised Millwright Trade Test Certificate (Red Seal) as obtained in South Africa.
* 0\-2 years post\-trade experience.
* Fully bilingual (Afrikaans and English).
* Must be willing to perform standby duties as required.
* Must be willing to work overtime.
* Forklift license is advantageous.

**SKILLS AND CAPABILITIES:**

* Good at adhering to strict safety guidelines and conscious of safety risks.
* Excellent attention to detail.
* Proficient in troubleshooting techniques to solve machine issues.
* Able to work well under pressure.
* Mechanical aptitude in working with wrenches, hammers, forklifts, and other similar tools. Exceptional time management and communication skills.
* Able to read and follow documents such as specifications, machine manuals, blueprints, and electrical drawings.
* Effective organisation and prioritising of tasks.
* Able to work independently and as part of a team.
* Comfortable with routine work but flexible enough to adjust to ad hoc situations.
* Must be able to think creatively and come up with innovative ideas.
* Strong electrical aptitude, including the ability to use various electrical testing equipment. Willing to take ownership of tasks and lead assisting team members.

**RESPOSIBILITIES INCLUDE BUT ARE NOT LIMITED TO:**

* Assembling, installing, moving, and electrically wiring all factory equipment.
* Testing all installed equipment to ensure they are working correctly.
* Operating machinery or equipment, such as forklifts, to move heavy loads.
* Complying with health and safety regulations.
* Minimising equipment and production downtime.
* Attending to both mechanical and electrical breakdowns.
* Running tests, making temporary repairs, or installing new parts to identify and repair problematic machine parts.
* Dismantling and replacing older machines.
* Running preventative maintenance by identifying and correcting potential issues, removing worn\-out pieces, and lubricating mechanical parts.
* Repairing equipment to a high standard.
* Performing routine tests and inspections on electrical and mechanical equipment according to safety regulations.
* Installation, maintenance, repair, design, and wiring of electrical systems.
* Accurately and timeously completing Job Cards when tasks are completed.
* Ad Hoc or other related duties as assigned.

**ONLY** short\-listed candidates will be contacted.

MILLWRIGHT – FM1941

Closing Date 2026/08/30
   

  

 Reference Number RCL260820\-2
   

  

 Company RCL Foods
   

  

 Job Title Semi\-skilled Artisan
   

  

 Functions Engineering
   

  

 Job Type Classification Permanent
   

  

 Location \- Town / City Pretoria West
   

  

 Location \- Province Gauteng
   

  

 Location \- Country South Africa
   

  

**Job Description**
 RCL FOODS is a deeply rooted South African food manufacturer that produces some of the country’s most\-loved brands, including Yum Yum peanut butter, Nola mayonnaise, Ouma rusks, and Selati sugar, just to name a few. At the heart of our culture and strategy is our Purpose – WE GROW WHAT MATTERS – which reflects our belief in collectively doing that little more to create a positive impact that truly matters.
   

  

 Visit our website: www.rclfoods.com
   

  

 RCL FOODS is seeking a motivated and enthusiastic Semi\-skilled Artisans to join our Milling Division to assist artisans with daily maintenance and constructive work.
   

  

**Minimum Requirements**
* N4 mechanical/ electrical (minimum)
* N5 and above would be an advantage.
* Trade tested Electrician OR Trade tested Millwright OR Trade tested Fitter OR Trade tested fitter and turner OR Trade tested boiler maker (Advantageous)
* Matric passed (Grade 12\) or equivalent.
* Knowledge of hand tools and basic hand skills.
* Must be physically strong and healthy.
* Flour Milling/ Milling work experience of 5 years and above will be an advantage.
* Ability to read, write and communicate in English, compulsory.
* Computer Literacy.
* Must be willing to learn and grow professionally.


**Duties \& Responsibilities**
* Perform preventative and corrective maintenance tasks.
* Perform standby duties, work shifts, attend to breakdowns, do fault finding and carry out emergency repairs.
* Complete job cards and update vehicle records.
* Order spare parts (consumables), interpret spares and workshop manuals.
* Housekeeping, Participate in Total Productive Maintenance, as well as Health and Safety responsibilities.
* Ensure your workplace is clean, neat always.
* Conduct adhoc operationally relevant duties

Semi-skilled Artisan

We are looking for a hands\-on, hardworking and solutions\-driven
 **Fitter and Turner** 
 with strong mechanical maintenance, fault\-finding, repair and installation capabilities. Experienced in maintaining and optimising production equipment to minimise downtime and ensure safe, reliable and efficient plant operation.
   

  

**About PG Bison**
 PG Bison is a proudly South African company and a leader in the manufacture of wood\-based panel products. With over 120 years of innovation and industry expertise, we play a critical role in shaping the future of interior design and construction through high\-quality products and sustainable practices. At PG Bison, we’re not just manufacturing materials; we’re building careers, empowering communities, and driving technological progress.
   

  

**Why Join Us?**
 We believe in investing in our people and creating an environment where talent can thrive. Join a team that is passionate about operational excellence, safety, and innovation, and be part of a company that is respected both locally and globally.

Fitter and Turner

Requirements: Qualified Millwright with Trade Certificate. Minimum 3 years work experience in food and beverage industry Ability to conduct maintenance tasks on mechanical, electrical and instrumentation equipment. SAP experience Fault-finding and problem solving skills. Knowledge of the OHS Act (safety legislation) is essential. Duties: Maintenance & repair of equipment Faultfinding Inspection of equipment Analyze proposed modifications and provide input Preventative maintenance activities Inv…

Introduction We are seeking millwrights in the Durban/Maydenwharf/Bayhead area, with strong mechanical maintenance experience, together with electrical millwright experience. Candidates must have experience working on bobcats, FELs (Front End Loaders) and excavators. The ideal candidate must also have a good attitude, be reliable and dependable, trustworthy, show initiative, have good communication, have excellent people skills, have confidence, a professional attitude, able to handle pressure …

Millwright Jobs in Johannesburg - Page 4

Vacancies (page 4 of 6)