Browse 817 live welder jobs across South Africa. Salary guide, top employers and free apply links. Updated regularly.

Introduction Please apply via email on intern@icongroup.co.za We are looking for a variety of candidates for maintenance and other skilled opportunities on a mine. We are looking for: Rigger Boilermaker Pipe welder Pipe fitter Rubber liner Fitter Diesel mechanic Rigger foreman Fitter foreman Desired Experience & Qualification Please be sure that you meet the following requirements: A Red Seal Trade in the relevant discipline. At least two years experience working in that trade on a mine. Be abl…

Various Artisans with Mining experience

Introduction An exciting international opportunity is available for an experienced Welder to join an established manufacturing operation in the United Kingdom. The successful candidate will be responsible for high-quality welding, fabrication and engineering repairs to plant and equipment, ensuring production efficiency and minimising downtime. Coded welders are essential for this position. Applicants must have relevant welding qualifications, proven welding experience and the ability to work c…

Welder - UK Relocation Opportunity

**NORTH\-WEST UNIVERSITY (POTCHEFSTROOM CAMPUS)** 




**FACULTY OF ENGINEERING – SCHOOL OF CHEMICAL AND MINERALS ENGINEERING** 




**POSITION NUMBER: P000246** 




**VACANCY: PRINCIPAL TECHNICIAN** 




**PEROMNES GRADE: P9** 




**EMPLOYMENT TYPE: PERMANENT APPOINTMENT** 




  





**PURPOSE OF THE POSITION** 




 The incumbent should manage workshop personnel and equipment while supporting the department in designing research equipment by translating academic concepts into practical, implementable solutions.
 



  





**MINIMUM REQUIREMENTS:** 



* A National Diploma in Mechanical Engineering (NQF Level 6\) or an N6 Certificate in Mechanical Engineering with a recognised trade qualification.
* A minimum of three (3\) years’ experience in engineering technical support.
* A minimum of two (2\) years’ management experience.



  





**JOB DESCRIPTION** 




**KEY RESPONSIBILITIES:** 




**Teaching/Learning** 



* Demonstrate practical competence across fitting and turning, machining, welding, and boilermaking, with additional experience in repairing electronic components and maintaining analytical laboratory equipment, contributing effectively to hands\-on teaching, student support, and the upkeep of teaching and learning facilities.



**Research** 



* Practical expertise in fitting and turning, machining, welding, and boilermaking, complemented by experience in repairing electronic components and maintaining analytical laboratory equipment to support research within the School of Chemical and Minerals Engineering and the Centre of Excellence for Carbon\-Based Fuels. This includes providing technical input on pilot\-scale projects and translating academic concepts into practical, implementable solutions that enhance system safety, efficiency, and overall design optimization.



**Commercialization** 



* Demonstrate technical expertise in fitting and turning, machining, welding, and boilermaking, with additional experience in electronic component repair and the maintenance of analytical laboratory equipment, supporting externally funded projects and collaborative research initiatives.



**Management** 



* Oversight and supervision of junior workshop staff, including on\-the\-job training, skills development, and the identification of training and capacity\-building needs, while guiding the team in translating academic concepts into practical, implementable solutions. This role also ensures the efficient operation of workshop activities, including managing consumables, scheduling equipment maintenance, and motivating for the replacement of ineffective equipment.



  





**KEY FUNCTIONAL/ TECHNICAL COMPETENCIES:** 



* Electrical wiring, panel assembly, and soldering.
* Machining and fitting.
* Boiler making and welding.
* Fault finding and repairing of electronic equipment.
* Workshop supervision, planning, and resource management.



  





**BEHAVIOURAL COMPETENCIES:** 



* Communication and stakeholder liaison
* Leadership and team development
* Coaching and mentorship
* Collaborative engagement.



  





**REMUNERATION:** 




 The annual total remuneration package will be commensurate with the level of appointment as advertised and in line with the NWU policy guidelines.
 



  





**ENQUIRIES REGARDING JOB CONTENT MAY BE DIRECTED TO:** 
 Mr. Sean Mashimbyiat on 018 299 1661
 



**ENQUIRIES REGARDING RECRUITMENT PROCESS MAY BE DIRECTED TO:** 
 Mrs. Fadilha Minty on 018 299 4993
 



**CLOSING DATE:** 
 10 November 2026
 



**PLANNED COMMENCEMENT OF DUTIES:** 
 As soon as possible
 



  





**Kindly take note:** 
 applications must be submitted online through the official NWU vacancy website. Incomplete applications and those submitted through any other platform will not be considered.
 



  





 The University subscribes to and applies the principles of Employment Equity (EE) Act and is committed to transformation. Preference will be given to candidates from the designated groups, in accordance with the principles of the EE Act and NWU Employment Equity Plan.
 



  





 The University reserves the right not to make an appointment. Communication will be limited to shortlisted candidates only.
 



  





 If you are not contacted within two months from the closing date of this advertisement, please accept that your application was unsuccessful.
 



  





**It all starts here ®**

Principal Technician

**Welder/Gouger**
**Location:** 
 Port Elizabeth
   

  

**Work Arrangement:** 
 Onsite
   

  

**What We Do At Weir**
 We are a global leader in mining technology for a sustainable future. We help our customers extract the resources the world needs more efficiently and more sustainably. Our planet’s future depends on the transition to renewable energy, and that transition can only happen with the metals and minerals our customers deliver. So, we work side by side with mines across the globe to move less rock, use less energy, use water wisely, and create less waste. Together, we drive the shift to smart, efficient, and more sustainable mining.
   

  

**Make your impact**
 You’ll play a key role in solving real\-world challenges. You’ll apply your skills to deliver results that matter whether that’s through engineering, planning or customer support. You’ll work with purpose, learn every day and help shape a more sustainable future.
   

  

**What You’ll Do**
* Gouging of parts and removing burn\-on, flash and runner system.
* Ensure gouging is done according to required standards.
* Report non\-conforming items to Shift Leaders.
* Safety First: Demonstrate 100% commitment to our zero harm behaviors in support of our drive towards developing a world\-class safety culture.


**What You’ll Bring**
**Must\-haves:**
* Matric (Grade 12\).
* Minimum of two years of welding experience in an engineering, manufacturing, mining or related environment.
* Knowledge and experience in welding ductile iron (SG) and High Chrome alloys (A05/A61\).
* Ability to read and interpret documents.


**Why join Weir?**
 We live our values we think safety first, do the right thing, respect each other, aim high, and delight our customers. We encourage our people to lead by example and celebrate our successes.
   

  

 We’re passionate about our purpose to help deliver the natural resources that are essential to create a better future for the world. We do this by combining our deep customer insights, world\-class engineering, materials science expertise, and intelligent automation to deliver innovative end\-to\-end solutions incorporating our signature technologies.
   

  

 We believe your voice matters and your ideas make a difference. We’re working hard to nurture a diverse culture where our people feel like they belong and can do the best work of their lives. You can help shape our unique culture through our inclusion networks and safety initiatives.
   

  

**Benefits**
* Competitive pay.
* Career development and learning support.
* Access to global inclusion networks.
* Regional and team\-specific benefits.
* Sharebuilder scheme.
* Wellness support for you and your family.
* Collaboration with global teams.
* Study support.


 \#Minerals

Welder / Gouger

As a Welding Supervisor / Charge Hand, you will be responsible for leading a team of welders, ensuring that all welding tasks are completed to the highest standards of quality and safety. You will also be responsible for training and mentoring junior welders, troubleshooting welding issues, and maintaining welding equipment.

**Qualifications / Experience:**

* Engineering Trade Certificate in Welding with min 5 years' experience SMWA / MMA, GMAW/ FCAW / MIG MAG, GTAW / TIG and SAW experience
* 5 years supervisory experience.
* Ability to read and interpret engineering drawings (welding \& machining symbols).
* SAIW Welding Supervisors or welding co\-ordinator Certification will be advantageous.
* Knowledge of OSH ACT.
* Prepared to work extended hours and shifts.
* Good understanding of AWS D1\.1 and ISO 3834\-2
* Effective communication skills, subordinates, peers and management
* Self\-discipline
* Computer literate (MS excel, word \& project)
* Ability to drive performance and set targets.

**Duties:**

* Provide technical guidance and supervision of welding activities performed.
* Analyse weld repairs and giving guidance for improvements to reduce the repair rates.
* Ensure health and safety targets within your area are achieved.
* Job Clocking and Employee record keeping (Hours).
* Undertake the control and management of welding operations in association with QC and Production departments.
* Supervise welding activities performed at the plant for each project, through defining methods, procedures, deadlines, control specifications and working instructions with the assistance from other departments.
* Evaluate equipment, machinery and materials used for Welding activities. Assist with the selection \& calculation of welding tools, materials and speed.
* Provide technical guidance for preparation of Welding Procedure Specification (WPS) following the specific requirements of each client, manufacturing plant and project.
* Assist in preparation of safe operating procedures and works instruction related to various welding activities.
* Continuously update welding procedures and welder performance records.
* Understand parameters, requirements, processes related to welding activities performed.
* Provide training to welders in different materials and processes as per company requirements.
* Discuss one\-on\-one welder performance.
* Conduct daily inline inspections.
* Set targets as per the route sheet and ensure no overspending.
* Take the necessary disciplinary actions to correct behaviours.
* Supervise staff for reporting, recording and inspection activities.
* AD HOC Duties as and when required.

Pay: R220,00 \- R250,00 per hour

Work Location: In person

Welding Supervisor

Well established transport company based in Randfontein has a vacancy for a boilermaker who has experience working on trucks and super link trailers.

Must have at least 3 years experience. Position available immediately.

Pleas send full CV with valid references to hr@routelogic.co.za

Pay: From R8 000,00 per month

Work Location: In person

Boilermaker/Welder

**PURPOSE OF ROLE**



To maintain and improve the reliability, availability and safe operation of Foil Rolling equipment through effective electrical, mechanical and instrumentation fault\-finding, planned maintenance, repairs and continuous improvement.

  


**KEY PERFORMANCE AREAS AND RESPONSIBILITIES**


* Attend to electrical, mechanical and instrumentation breakdowns and restore equipment safely and efficiently.
* Perform planned, preventative and condition\-based maintenance on Foil Rolling Mills, Foil Separators, annealing furnaces, ball mills, oil reclamation plants and overhead gantry cranes.
* Fault\-find and repair PLC\-controlled equipment, variable speed drives, motors, hydraulic systems, pneumatic systems and basic instrumentation.
* Read and interpret electrical and mechanical drawings, schematics and equipment manuals.
* Complete machine inspections, maintenance checklists, work orders and equipment history records using MAXIMO or a similar computerised maintenance management system.
* Participate in equipment reliability reviews, root cause analysis and multidisciplinary problem\-solving forums.
* Support shutdown planning and execution, including the identification of work, spares, tools and resources required.
* Apply safe isolation, lock\-out and permit\-to\-work requirements and comply with safety, quality and environmental standards.
* Provide shift leadership when required and work collaboratively with Operations, Process and Maintenance teams.
* Identify and implement cost\-effective improvements that enhance safety, equipment reliability, quality and productivity.

  

**MINIMUM REQUIREMENTS**


* Recognised Millwright Trade Test certificate.
* Minimum N3 qualification. N4 to N6 or a relevant diploma will be advantageous.
* At least 3 years post\-apprenticeship experience in a heavy industrial manufacturing environment.
* Practical experience in electrical and mechanical maintenance, fault\-finding and repair.
* Ability to work on PLCs, AC/DC drives, hydraulics, pneumatics, overhead cranes and basic instrumentation.
* Experience with Siemens PLCs and Siemens AC/DC drives will be advantageous.
* Wireman's Licence.
* Competence in isolation and lock\-out procedures and the ability to read electrical and mechanical schematics.
* Computer literacy and familiarity with MAXIMO or a similar maintenance management system.
* Preparedness to work shifts, overtime and standby as operationally required.
**CORE COMPETENCIES**
* Technical Maintenance Expertise \- Strong multidisciplinary fault\-finding and repair capability.
* Problem Solving \- Ability to identify root causes and implement sustainable corrective actions.
* Safety and Compliance \- Consistent application of safe work, isolation and quality requirements.
* Reliability and Continuous Improvement \- Focus on equipment uptime, work quality and cost\-effective improvement.
* Teamwork and Leadership \- Ability to coordinate work, communicate effectively and provide leadership on shift.
* Accountability \- Self\-driven, disciplined and able to work independently under operational pressure.
* Actively participate in reliability and problem solving forums.
* Preparedness to work shifts, overtime and standby.

  


*Hulamin is committed to prioritising transformation in line with diversity, inclusion and all legislative requirements in its recruitment and appointment processes.*


*Hulamin reserves the right to withdraw, alter and re\-advertise any vacant position based on its operational requirements.*


***Hulamin does not require or solicit any payments for any recruitment process. Please report any such request to the Hulamin Ethics and Fraud Hotline at 080 2255 688\.***


***Closing Date: 8 November 2026***

Millwright

About the Role Our client, a reputable fabrication and engineering company, is seeking a skilled and certified Welder specializing in structural and industrial fabrication to join their team on a contract basis in Soweto, Gauteng . This role is essential for the construction and repair of various industrial structures, machinery, and components. You will be responsible for performing high-quality welding using different techniques and materials, ensuring that all work meets stringent industry s…

Welder - Structural & Industrial Fabrication

We are seeking a skilled Artisan Welder to join our team. The ideal candidate will be responsible for performing welding tasks in various settings, ensuring high-quality workmanship and adherence to safety standards. Key responsibilities include interpreting blueprints and technical drawings, selecting appropriate welding techniques and materials, and executing precise welds on a variety of metals. The Artisan Welder will also be tasked with conducting inspections of completed work to ensure co…

Artisan Welder

Placements24 is recruiting for a Junior Welder Apprenticeship in Klerksdorp, North West. You will join a busy workshop, learning MIG, TIG and Arc welding under experienced welders, while developing precision, safety discipline and quality workmanship. The program offers comprehensive hands-on training, mentorship, and a clear path to becoming a certified welder as you gain practical experience on structural steel projects. J-18808-Ljbffr

Apprentice Welder: Hands-On Training & Mentorship Klerksdorp

We are looking for highly skilled and versatile Welders to join upcoming petrochemical projects across South Africa and Namibia. We are hiring Coded , Plate and Pipe Welders. This role ensures that all welding activities meet the highest quality, safety, and operational standards while supporting project deliverables in high-risk industrial environments such as fuel storage depots and refineries. Department: Projects Location: Various locations within South Africa and/or Namibia Employment Type…

Welder - Petrochemical Industry

About the Role Our client, a leading industrial fabrication company situated in Rustenburg , is offering a coveted Apprenticeship opportunity for aspiring Welders. This position is ideal for individuals who are passionate about metalwork and eager to acquire the skills necessary for a successful career in welding. You will receive comprehensive training under the guidance of seasoned professionals, learning various welding techniques and safety protocols essential in the industry. This apprenti…

Apprentice Welder in Rustenburg

About the Role Our client, a leading structural fabrication company based in Klerksdorp, North West, ZA, is seeking enthusiastic and diligent individuals to join their team as Junior Welders. This is an exceptional opportunity to gain hands‑on experience in various welding techniques applied to structural steel fabrication. You will be working within a busy workshop environment, contributing to projects that require precision, skill, and a commitment to quality. The apprenticeship program will …

Junior Welder - Structural Fabrication

About the Role Our client, a prominent fabrication and manufacturing company specializing in structural steel, is actively seeking dedicated and aspiring individuals to join their workshop in Upington as Apprentice Welders. This program is designed to cultivate new talent, providing comprehensive training in various welding techniques and fabrication processes essential for structural work. You will learn under the mentorship of highly skilled and certified welders, gaining practical experience…

Apprentice Welder - Structural Fabrication

**The ideal candidate would be responsible for:** 



* Condition monitoring \& mechanical maintenance of equipment;
* Fitting and welding;
* Part manufacturing on lathes and milling machines;
* Proficient mechanical planning;
* Commissioning of mechanical equipment.



  





**The successful candidate must meet the following requirements:** 



* A qualified Fitter and Turner with a minimum N3 certificate;
* Completed apprenticeship with a trade test certificate;
* A minimum of 3 years’ experience as Fitter and Turner preferably in a manufacturing environment;
* Experience in gear\-boxes, hydraulic\- and pneumatic systems will be a definite advantage;
* Be pro\-active and able to use own initiative;
* Continuous improvement mind\-set and be able to work in a team as well as individual environment;
* Personal and professional integrity;
* Be prepared to work overtime and carry out standby duties on a roster basis;
* Comply with all company policies and procedures, including but not limited to: Health \& Safety, risk management; Astral Code of Conduct;
* Commit and comply to the requirements of ISO 9001, ISO 22000, HACCP, 20 Keys, Astral Code of Ethics, and any other company management systems.
* Maintain a high standard of housekeeping at all times;
* Be prepared to relocate to close vicinity of the factory;
* *Applications will only be considered if accompanied by a copy of your trade certificate.*
* *Location: Paarl*



  





 We offer a competitive total cost to company salary package.
 



**Closing date: 09 November 2026** 




  





*Please note if you have not been contacted by 01/12/2026, your application was unsuccessful.* 




  





 Paarl
 



  





 Published Date: 26 October 2026
 



 Closing Date: 09 November 2026

Fitter and Turner - Meadow Feeds - Paarl

We are looking for a variety of candidates for maintenance and other skilled opportunities on a mine. We are looking for: Rigger Boilermaker Pipe welder Pipe fitter Rubber liner Fitter Diesel mechanic Rigger foreman Fitter foreman Please be sure that you meet the following requirements: A Red Seal Trade in the relevant discipline. At least two years experience working in that trade on a mine. Be able to work on site in Mpumalanga from Monday to Friday. Able to pass a Mine Medical Examination. R…

Miner Mpumalanga

Job Description: Produce detailed manufacturing drawings, plant layouts, and 3D models for engineering projects Develop practical and cost-effective designs with a focus on manufacturability and waste reduction Generate fabrication, assembly, and production drawings to support manufacturing activities Work closely with engineers, welders, and assembly teams to ensure designs are feasible and fit for purpose Perform calculations required for design development and drawing preparation Maintain dr…

Mechanical Daughtsman

Reference: CEN001443-MP-1 As a Welding Supervisor / Charge Hand, you will be responsible for leading a team of welders, ensuring that all welding tasks are completed to the highest standards of quality and safety. You will also be responsible for training and mentoring junior welders, troubleshooting welding issues, and maintaining welding equipment. Qualifications / Experience: Engineering Trade Certificate in Welding with min 5 years' experience SMWA / MMA, GMAW/ FCAW / MIG MAG, GTAW / TIG an…

Chargehand Vanderbilpark

As a Welding Supervisor / Charge Hand, you will be responsible for leading a team of welders, ensuring that all welding tasks are completed to the highest standards of quality and safety. You will also be responsible for training and mentoring junior welders, troubleshooting welding issues, and maintaining welding equipment. Qualifications / Experience: Engineering Trade Certificate in Welding with min 5 years' experience SMWA / MMA, GMAW/ FCAW / MIG MAG, GTAW / TIG and SAW experience 5 years s…

Welding Supervisor / Charge Hand (Vanderbijlpark)

Reference: CTE028891-HB-1 Are you a detail-oriented Mechanical Draughtsman with a passion for transforming concepts into practical manufacturing solutions? This opportunity is suited to an individual with strong 3D CAD experience who enjoys working closely with engineers, fabrication teams, and production personnel to develop accurate and cost-effective designs for manufacturing environments Job Description: Produce detailed manufacturing drawings, plant layouts, and 3D models for engineering p…

Mechanical Daughtsman Cape Winelands: Stellenbosch

Overview Our client, an established steel manufacturing operation based in the KwaMakhutha area of KwaZulu\-Natal, is seeking an experienced Gas Cutter to join its production team on a full\-time basis. The successful candidate will be responsible for the accurate cutting of steel sections and plate to specification, working safely and efficiently within a busy workshop environment. Key Responsibilities • Operate oxy\-fuel and gas cutting equipment to cut steel plate, sections, pipe and offcuts to required dimensions • Interpret cutting lists, drawings and marked out lines to ensure accurate and square cuts • Set up, adjust and change nozzles, hoses, regulators and torches as required for different material thicknesses • Mark out and measure material before cutting to minimise waste and scrap • Inspect finished cuts for dimensional accuracy, clean edges and acceptable heat affected areas • Grind, dress and clean cut edges where required before the material moves to the next process • Conduct daily checks on gas bottles, hoses, flashback arrestors and cutting equipment and report defects • Handle and move steel safely using cranes, slings, trolleys and other lifting aids • Maintain correct gas pressures and monitor consumption to control cutting costs • Keep accurate records of material cut, offcuts and job numbers • Comply with all health and safety requirements, including the correct use of personal protective equipment • Maintain a clean, tidy and hazard free work area at all times • Support the production team with general workshop duties during quieter cutting periods • Report production delays, material shortages or quality concerns to the supervisor promptly Requirements • Three to five years of hands on gas cutting experience in a manufacturing, steel or engineering environment • Proven competence in oxy\-fuel cutting across a range of material thicknesses • Ability to read and work from cutting lists, basic drawings and measurements • Sound understanding of gas cutting safety, gas handling and the use of personal protective equipment • Physically fit and able to work with heavy steel in a workshop environment • Reliable, punctual and able to work as part of a production team • Grade 10 or higher, or an equivalent trade related qualification, will be advantageous • Willingness to work overtime when production demands require it Benefits and Compensation Our client is offering a salary, depending on experience and demonstrated cutting ability. • Permanent, full\-time position with a stable manufacturing employer • Personal protective equipment supplied • Overtime opportunities when production volumes require • On the job training and exposure to a range of steel products and processes

Welder Jobs in South Africa - Page 3

Vacancies (page 3 of 8)